ODU-E Changelog

NOTICE! 
From version 1.5.R1 onwards, there are two available firmware files.
Which file you choose for the update depends on your hardware version.
Versions beginning with a 1 are for the old hardware (Same70n21b, version A).
Versions beginning with a 2 are for the latest hardware (Same70n19b, version B).
If you are unsure about which hardware you have, please get in touch with Videosys Support at:
support@videosys.tv or +44(0) 1293 541 200

Autumn Release 2025

Version 1.7.R1 & 2.7.R1:
Features:
-	Added support for wider Satel Radio bandwidth
-	Added support for different Satel Radio ranges
-	DHCP support added for control web interface
Fixes:
-	IGMP subscription routine implemented
_______________________________________

Version 1.6.B1 & 2.6.B1:
Features:
-	Adding bandwidth options for the satel radio

Version 1.5.R1 & 2.5.R1:
Features:
-	Split firmware into two version to allow compatibility with both the SAME70N21 and SAME70N21 versions of the ODU

Version 1.4.R1:
Features:
-	Adding ability to set radio frequency limits through the serial config via ethernet 
	These settings can be set by connecting to the unit using Realterm and sending the upper limit command: "UPFREQ:47300000" or the lower limit command:"LOFREQ:40300000" with the number being replaced with the desired frequency
	The number in the command needs to be 8 digits/characters long to work, no more and no less.
	Due to potential backwards compatibility issues there's a limited range of possible frequencies between 400MHz and 930MHz
	If a frequency is set outside of this range, then default values of 40300000 and 47300000 will be used instead

V2.1.A0 (10/10/2022)
Features:
- Port from Same70n21 (version A) to Same70n19b (version B). 
  SamE/IP_ODU/ODU_E_e70n19b.hzp . Branch: MovingToCrowWorks4.8

V1.1.A0 (05/08/2020)
Features:
- Remote configuration client, can be controlled from IDU over ethernet

V1.0.A0 (06/09/2019)
Features:
- Ethernet Connection now accepts all videosys packet types which allows
	- tally only operation via ethernet link
	- BiDir operation via ethernet link
- Ethernet Debugging added.

V0.1.B0 (15/02/2019)

Features:
- Multicast group support for IP Camera Control data input.

Fixes:
- Bug fix for Firmware update reliability (older versions may sometimes 
fail on the first attempt from board power up, subsequent attempts should 
always succeed though) 
- RS232/RS485 auto detect performance upgraded.