RXSM-E Changelog Version 2.10.R1: Features: - Added support for BalckMagic cameras over IP control. Fixes: - Fixed a Panasonic Studio issue with the UCX100 camera. This now supports both Serial and Ethernet connection. Version 2.9.R1: Features: - Adding ability to set radio frequency limits through the serial config via ethernet These settings can be set by connecting to the unit using Realterm and sending the upper limit command: "UPFREQ:47300000" or the lower limit command:"LOFREQ:40300000" with the number being replaced with the desired frequency The number in the command needs to be 8 digits/characters long to work, no more and no less. Due to potential backwards compatibility issues there's a limited range of possible frequencies between 400MHz and 930MHz If a frequency is set outside of this range, then default values of 40300000 and 47300000 will be used instead Version 2.8.R1: Features: - Added support for new camera manufacturer: Proton, this camera manufacturer is similar to Dreamchip - Added support for new camera manufacturer: Arri CAP, used on the Alexa 35 and Alexa Mini LF and any other Arri cameras that use the CAP protocol v1.13 Version 2.7.R1: Features: - Added OEM test mode, this will break normal operations and is intended for use in manufacturing processes only. Tests the RS232 and/or RS485 serial hardware by receiving and sending test data from/to an IDU Version 2.6.R1: Features: - Dreamchip CCFilters have been mapped to colour temperatures - Additional Menu option under SystemSettings/CameraOptions/DreamChip Expo Speed, allows users to select the auto exposure speed between 3 and 30 (see datasheet) - Additional Menu option under SystemSettings/CameraOptions/DreamChip RGB Range, allows users to select between Full, 3/4, 1/2, 1/4, 1/8 colour range Fixes: - OEM tally command - Reversing the min and max for the RGB black settings Version 2.5.R3: Features: - Added an option to select which tally lights need to come on for Sony Cameras. Fixes: - Improved the connection recovery on GV over ethernet after a power cycle. Version 2.5.S2 (not released): Features: - Added OEM test mode, this will break normal operations and is intended for use in manufacturing processes only. Tests the RS232 and/or RS485 serial hardware by receiving and sending test data from/to an IDU Version 2.4.R1: Fixes: - Improved connection handshake and indication on Panasonic Studio serial cameras Version 2.3.R2: Fixes: - Fixed GV tally lights when used in Serial Bidirectional mode Version 2.3.R1: Features: - Exposed Multizone Control in the remote OEM protocol - Version 2.2.B2: Features: - Expanded external control protocol for OEM boards: - Ethernet connectivity at camera head - Support for FX9, GV ethernet, Panasonic Ethernet Version 2.2.B1: Features: - Support added for Sony Ethernet connection (tested with FX9). Version 2.1.R2 (release): Fixes: - Fixed problem with tally lights on Grass Valley when connected via ethernet. - Fixed problem with Grass Valley ethernet cameras showing Connected when removing the cable. - Fixed color matrix control in unidirectional for Panasonic Studio Ethernet cameras. Version 2.1.R1 (release): Version 2.1.B1 (beta): Features: - Added support for Panasonic Ethernet Connection at the camera end. - Panasonic Ethernet settings are now exposed on the webpage of the camera control. Fixes: - Fixed a problem where bars could not be switched off in Panasonic ethernet unidirectional mode. Version 2.0.R1 (release): Features: - Added full support for Grass Valley C2IP interface via ethernet on the camera side. - New webpage to allow configuration of the module from the web browser. - User Presets: * Preset settings can be set via the webpage and stored in the device * Presets can be recalled and applied via the front panel or the webpage * The active configuration can be stored in the unit as a set of presets * Save to and load from file can be used for presets Fixes: - Fixed a problem with the camera number change leading to bidi operation problems _______________ V1.3.A6 Fix for: Sony reconnect on restart V1.3.A5 Fix for: Remote config addressing issue V1.3.A4 Fix for: GV camera selection bug re-introduced V1.3.A3 Inclusion of special versions: V1.3.S2 (Built off V1.2.A6!) - Remote Config expanded command set V1.3.S0 (Built off V1.2.A6!) - DTC remote config initial release V1.2.A12 Fix for: - Start up issue with new radio module resulting in intermittent inability to read settings. V1.2.A11 Fix for: - Arri issues, based on newer IDU code, does disconnect handling Known issues: - Arri BiDi not working V1.2.A10 Fix for: - Arri issue, based on older RX-E code Known issues: - Arri BiDi untested V1.2.A9 Fix for: - Sony relative colour mode bug - Auto reboot on camera options that require it V1.2.A7 Fix for: - Bug where BiDi capable manufacturers don't work without DiDi Licence V1.2.A6 Fix for: - Panasonic AJ-PX5000 Master gain relative mode (camera doesn't support absolute command) - Gv UniDirectional issues V1.2.A5 Fix for: - Panasonic AJ-PX Connection - BiDi init issues introduced in 1.2.A4 V1.2.A4 New Features: - Changed to camera MFG screens, uses IDU style mode walkthrough Fixes: - Camera Mfg will cycle to valid mode V1.2.A3 - Return Data Baudrate init issue - RS232 Camera Uart Bug V1.2.A2 Fixes for: - RS232 Camera Uart Bug - Gv Licencing Bug - Gv Stable New Features: - IDT R Series Alpha Implementation (Ethernet) V1.2.A1 Fixes for - Sony P1: and P50 Bars - Sony Venice ND - Sony Z450 Autowhite V1.2.A0 - Fix for MultiZone radio communications bug New radio communications system implemented - Further Ethernet Debugging inhancements V1.1.A0 - Added Ikegami support - Added ethernet debugging V1.1.A4 - Hitachi Misc fixes V1.1.A3 - Sony AWB update, Settings added to menu V1.1.A2 - Hitachi BiDi Stable - Sony BiDi Stable - Added MultiZone - Added Gv BiDi NOT stable IPRX_1_0_B3 (14/02/2019) Misc updates involving: - Bug fix for Firmware update reliability (older versions may sometimes fail on the first attempt from board power up, subsequent attempts should always succeed though) IPRX_1_0_B2 (24/01/2019) Misc updates involving: - Ethernet Configuration - Splashscreen - SPI