RXSM-E Changelog

Version 2.3.R1:
Features:
-	Exposed Mutlizone Control in the remote OEM protocol
-	

Version 2.2.B2:
Features:
-	Expanded external control potocol for OEM boards:
	- Ethernet connectivity at camera head
	- Support for FX9, GV ethernet, Panasonic Ethernet

Version 2.2.B1:
Features:
-	Support added for Sony Ethernet connection (tested with FX9).

Version 2.1.R2 (release):
Fixes:
-	Fixed problem with tally lights on Grass Valley when connected via ethernet.
-	Fixed problem with Grass Valley ethernet cameras showing Connected when removing the cable.
-	Fixed color matrix control in unidirectional for Panasonic Studio Ethernet cameras.

Version 2.1.R1 (release):
Version 2.1.B1 (beta):
Features:
-	Added support for Panasonic Ethernet Connection at the camera end.
-	Panasonic Ethernet settings are now exposed on the webpage of the camera control.
Fixes:
-	Fixed a problem where bars could not be switched off in Panasonic ethernet unidirectional mode.

Version 2.0.R1 (release):
Features:
-	Added full support for Grass Valley C2IP interface via ethernet on the camera side.
-	New webpage to allow configuration of the module from the web browser.
-	User Presets:
	* Preset settings can be set via the webpage and stored in the device
	* Presets can be recalled and applied via the front panel or the webpage
	* The active configuration can be stored in the unit as a set of presets
	* Save to and load from file can be used for presets
Fixes:
-	Fixed a problem with the camera number change leading to bidi operation problems

_______________

V1.3.A6
Fix for:
Sony reconnect on restart

V1.3.A5
Fix for:
Remote config addressing issue

V1.3.A4
Fix for:
GV camera selection bug re-introduced

V1.3.A3
Inclusion of special versions:
	V1.3.S2 (Built off V1.2.A6!)
	- Remote Config expanded command set

	V1.3.S0 (Built off V1.2.A6!)
	- DTC remote config initial release

V1.2.A12
Fix for:
- Start up issue with new radio module resulting in intermittent inability to read settings.

V1.2.A11
Fix for:
- Arri issues, based on newer IDU code, does disconnect handling
Known issues:
- Arri BiDi not working

V1.2.A10
Fix for:
- Arri issue, based on older RX-E code
Known issues:
- Arri BiDi untested

V1.2.A9
Fix for:
- Sony relative colour mode bug
- Auto reboot on camera options that require it

V1.2.A7
Fix for:
- Bug where BiDi capable manufacturers don't work without DiDi Licence 

V1.2.A6
Fix for:
- Panasonic AJ-PX5000 Master gain relative mode (camera doesn't support absolute command)
- Gv UniDirectional issues

V1.2.A5
Fix for:
- Panasonic AJ-PX Connection
- BiDi init issues introduced in 1.2.A4

V1.2.A4
New Features:
- Changed to camera MFG screens, uses IDU style mode walkthrough
Fixes:
- Camera Mfg will cycle to valid mode

V1.2.A3
- Return Data Baudrate init issue
- RS232 Camera Uart Bug

V1.2.A2
Fixes for: 
- RS232 Camera Uart Bug
- Gv Licencing Bug 
- Gv Stable

New Features:
- IDT R Series Alpha Implementation (Ethernet)

V1.2.A1
Fixes for 
- Sony P1: and P50 Bars 
- Sony Venice ND
- Sony Z450 Autowhite

V1.2.A0
- Fix for MultiZone radio communications bug
New radio communications system implemented
- Further Ethernet Debugging inhancements  

V1.1.A0
- Added Ikegami support
- Added ethernet debugging

V1.1.A4
- Hitachi Misc fixes

V1.1.A3
- Sony AWB update, Settings added to menu

V1.1.A2
- Hitachi BiDi Stable
- Sony BiDi Stable
- Added MultiZone 
- Added Gv BiDi NOT stable

IPRX_1_0_B3 (14/02/2019)
Misc updates involving: 
- Bug fix for Firmware update reliability (older versions may sometimes 
fail on the first attempt from board power up, subsequent attempts should 
always succeed though) 

IPRX_1_0_B2 (24/01/2019)
Misc updates involving: 
- Ethernet Configuration
- Splashscreen
- SPI